How to measure your door

WHEN MEASURING YOUR DOOR FOR AN EXTERNAL, INTERNAL AND INBETWEEN FIT.

Take your tape measure and measure on the inside top left hand corner of the opening to the inside top right hand corner e.g. brick to brick, and write down your measurements, then do the same again but at the middle of the opening and the same goes for the bottom, now when measuring the height of your opening, measure from the inside bottom left of the opening to the inside top left of the opening and then for the right hand side measure from the inside bottom right of the opening to the inside top right of the opening, once you have got all your measurements type them into the correct boxes on the right hand side.

Please note that if you do not have any other access to your garage other than from the garage door then you will need an external release kit for incase of emergency e.g. power cut.

It’s always good to measure twice as you do not want to order the wrong size door.

SELECT DOOR LATH SIZE

The 55mm lath requires at least 205mm above your opening height to allow for the door to roll up into the box above. This is mainly used if you don’t have much height. The lath is 55mm high and 14mm thick fully insulated.

The 77mm standard lath requires at least 300mm (1ft) above your opening height to allow for the door to roll up into the box above. The lath is 77mm high and 19mm thick fully insulated.

Measure the width of structural opening

mm
mm
mm
 

Measure the height of structural opening

mm
mm
 

WHEN CHOOSING WHICH SIDE TO HAVE THE MOTOR ON.

It is best to choose the side that has the easiest point of access for the electrical cables to come out of, when choosing a side it must be done when stood in the garage looking out, then choose left or right hand.

If the door is going to be fitted externally then you do this by standing outside the garage looking in and then choose left or right hand side for the motor.

Number of entry points to your Garage

Compulsory Extra

External Lockable Override Kit

+£135.00

If there is no other entry point into the garage this is to open the door incase of a power cut.

How should the door be fitted

Externally
Inside
Inbetween
Proceed to the next step

MEASURE THE SPACING AROUND YOUR DOOR.

  • If you are having your door externally fitted then please measure how much space you have on the outside of the garage pillar, measure from the opening to the outside of the garage wall. Do this on both sides of the opening. Now to measure for your headroom, you need to measure from the top of your opening up to the highest point that the door could go, this needs to be above your overall opening height.
  • If you are having your door inbetween fitted then you will have already measured your height in the first section.
  • If you are having your door internally fitted then please measure how much space you have on the inside of the garage pillar, ( do this from the inside of the garage) measure from the opening to the inside of the inside wall. Do this on both sides of the opening. Now to measure for your headroom, you need to measure from the top of your opening up to the ceiling, this needs to be above your overall opening height.

It’s always good to measure twice as you do not want to order the wrong size door.

measure the spacing around your door

mm
mm
mm
Proceed to the next step

CHANGE OUTSIDE WALL PREVIEW

Choose below to see what your door could look like on the style of brick you may have. This is for illustrative purposes only.

PLEASE SELECT A COLOUR FOR YOUR FRAME

Plain Colour Finishes

PLEASE SELECT A COLOUR OR FINISH FOR YOUR DOOR

Plain Colour Finishes
PLEASE NOTE THAT THESE COLOURS ARE FOR ILLUSTRATIVE PURPOSES ONLY AND MAY SLIGHTLY VARY TO THE END PRODUCT, PLEASE CONTACT US VIA EMAIL IF YOU WISH TO SEE A SAMPLE FIRST.

White
Silver
Red
Painted Rosewood
Moss Green
Light Grey
Light Beige
Golden Oak
Fir Green
Black
Brown
Light Brown
Blue
Anthracite
Cream
Dark Beige
Irish Oak
Light Ivory
Walnut
Proceed to the next step

Add extra features to your door

If you would like any optional extras then please select which ones and the quantity from the selection below. Please note that if you do not have any other access to your garage other than from the garage door then you will need an external release kit for incase of emergency e.g. power cut.

TVGSA868A01 - Telecom Plug in Alarm

+£109.80

Telecom Plug in Alarm to be used with TVSSH868A01- Continental. An in house plug in alarm to sound out 90dB when someone is attempting to get into your garage.

TVTXQ 868A03 - White

+£37.20

Teleco 3 channel hand held transmitter.

Battery powered door sensor

+£72.00

Battery powered door sensor for added security, the door alarm sensor will detect any attempt to break in to the garage and activate a 90dB alarm.

TVTXK868B04 - Teleco Battery Powered Radio Keypad - WHITE

+£108.00

TVTXK868B04 - Teleco Battery Powered Radio Keypad.

TVTXP868R013 4 Channel transmitter - conti EC71504

+£43.20

This is the standard remote you will get with your door.

TVTXQ 868A03 - Black

+£37.20

Teleco 3 channel hand held transmitter.

My Hand

+£360.00

Smart phone technology allows you to control all of your homes automated systems, including rolling shutters, blinds, awnings, garage doors, gates and lighting. My hand acts as an interface between your smart phone and the device you want to operate.

TVTXK868B04 - Teleco Battery Powered Radio Keypad - BLACK

+£108.00

TVTXK868B04 - Teleco Battery Powered Radio Keypad.

Get quote now

Confirm Info

Your garage door order...

Door Type

Lath Size (mm)

Structural Opening Width

Top Width (mm)
Middle Width (mm)
Bottom Width (mm)

Structural Opening Height

Left Height (mm)
Right Height (mm)

What side should the motor sit on:

Space around the door:

Left Side (mm)
Right Side (mm)
Head Room (mm)

Number of Entry Points:

Frame Colour:

Door Colour/Finish:

Optional Extras:

None

Your details...

First Name:

Last Name:

Address:

Post Code:

Telephone:

Email:

Special Instructions:

Price...

Door Price £-
Delivery Cost £-
VAT (Included) £-
Total £-

Lead Times Text

Please wait while we check your information.

Some information is required: